dust collectors and fume extractors
Dust collectors
IVACS for Milling and CAD CAM
Fully Automatic "Self-Cleaning" Dust Collector   Description
Quatro Air iVAC

4 More Reasons to use the IVAC CadCam Series:

  • HEPA Filter ensures 99.97% efficiency on submicron particles such as fine zirconium dust in CAD/CAM milling
  • Separate access doors allow you to remove debris without having to access filter section (keeps room clean)
  • Every MILL is different, purchase a Custom Kit specific to your MILL for seamless operation with your MILL (Milling machine software start-stops IVAC automatically)
  • Quietest unit on the market (52-55dbA)
Quatro Air iVAC
*Click to enlarge    
Quatro Air F081 Quatro Air F084 Quatro Air F069-81 Quatro Air F069-84   Quatro Air F190
F081 F082 F069-81 F069-84   F191S
iVL-311-16 iVAC, 1.5" dia inlet, low or medium usage
For smaller milling machines, intermittent milling operation or lower debris volume(1 disk/puck at a time)
Height 22" (559mm)
Width 15" (381mm)
Depth 20" (508mm)
Weight 65lbs (30kg )
CFM 141 (240 m3 / h)
W.C 90"
Particle Collection 7 US gallons (27 litres)
iVTL-311-16 iVAC TWIN, 1.5"dia inlet, heavy usage
For continuous milling operation or high debris volume (larger debris chamber)
Height 29" (737mm)
Width 15" (381mm)
Depth 20" (508mm)
Weight 85lbs (39kg )
CFM 282 (480 m3 / h)
W.C 90"
Particle Collection 10 US gallons (38 litres)
iVTL-16-Roland Specifically designed for ROLAND DWX-30/DWX-50 Milling Machine
(shipped with communication cable and necessary hose connections for quick/easy installation)
Height 29" (737mm)
Width 15" (381mm)
Depth 20" (508mm)
Weight 85lbs (39kg )
CFM 282 (480 m3 / h)
W.C 90"
Particle Collection 10 US gallons (38 litres)
Motor Type High Speed Turbine
Amps 7 / 3 ( iV-100, iV-200 series)
  12 / 6 (iVT-100 series)
Voltage 120 / 230
* Red indicates 230Volt usage  
Replacement Parts Part Number
HEPA Filter F191S
1.5” dia. Red Inlet Cap H620
2.5” dia. Red Inlet Cap H113
3” dia. Red Inlet Cap H148
1x1.5” inlet collar plate M071
2x1.5” inlet collar plate M192
1.5”dia.HeavyDuty Hose 6ft long H424-06
2.0”dia.HeavyDuty Hose 6ft long H154-06
2.5”dia.HeavyDuty Hose 6ft long H105-06
3”dia.HeavyDuty Hose 6ft long H142-06
1x2.5” inlet collar plate M173
2 x 2.5” inlet collar plate M006
1/8" Gasket Roll (40') H006
Rubber Grommets for Filter Support (4/pk) AR059
Rubber Grommets for Turbine Motor(s) (4/pk) AR059
1.5”dia.HeavyDuty Hose 12ft long H424-12
2.0”dia.HeavyDuty Hose 12ft long H154-12
2.5”dia.HeavyDuty Hose 12ft long H105-12
3”dia.HeavyDuty Hose 12ft long H142-12
1x2.0” inlet collar plate M232
Rubber Floor Grommets AR116
HICAP-Filter (iV) F081
HICAP-Filter (iVT) F082
HiCAP Filter (iVTL-16-Roland)) F082
Blower Turbine Assy AR175
FCS (Filter Cleaning System) Assy AR123-16
CE Certified
CSA Certified
HEPA Filters Certified

© OP-Studio - Quatro Air Technologies 2008-2009 All Rights Reserved